e-ISSN 2393-9877•p-ISSN 2394-2444•Quarterly•Open Access•IF 5.99
Track PaperUpload ReceiptContact
IJAREST logoIJARESTInt. Journal of Advance Research in Engineering, Science & Technology

Compressive and split tensile strength of Basalt Fibre Concrete as Partial Replacement of Fine Aggregate with Copper Slag

Sanket Makwana, Mr. Jigar Zala

PG Student, SAL Institute of Technology and Engineering Research, Ahmedabad, Gujrat, India, India

IJAR-2018-8EEA4BVol. 5, Issue 4April 2018Pages 386-392

Abstract

Plain concrete (PC) is a brittle material with low tensile strength and susceptible to cracking under tensile stress. Randomly distributed basalt fibres are able to link these cracks and obstruct their development. By this mechanism, the addition of chopped basalt fibres can enhance the mechanical behavior of plain concrete. Basalt fiber reinforced concrete (BFRC), a new high performance cement-based composite material. Basalt fibre concrete decreases the workability of concrete. Copper slag is an industrial by-product obtained during the smelting of copper which is used in concrete. Copper slag increases the workability of concrete. This experimental work carried out on concrete specimen containing chopped basalt fibre as additive materials and copper slag as partial replacement with fine aggregate. Adding different dosage of basalt fibre (1%, 2% and 3%) by weight of cement in concrete and partially replacement of copper slag (10%, 20%, and 30%) with fine aggregate by volume. Prepare standard cube and cylinder to measure compressive strength after 7days, 14days, and 28 days and split tensile strength after 28days of curing and compare this strength with M25 conventional concrete.

Keywords

How to cite

APA
Sanket Makwana, Mr. Jigar Zala (2018). Compressive and split tensile strength of Basalt Fibre Concrete as Partial Replacement of Fine Aggregate with Copper Slag. IJAREST, 5(4), 386-392.
BibTeX
@article{ijarest20188EEA4B,
  title={{Compressive and split tensile strength of Basalt Fibre Concrete as Partial Replacement of Fine Aggregate with Copper Slag}},
  author={Sanket Makwana and Mr. Jigar Zala},
  journal={IJAREST},
  volume={5},
  number={4},
  pages={386-392},
  year={2018}
}

Published under an open-access licence. See copyright & licensing.

✆