LABORATORY STUDY ON M40 GRADE CONCRETE BY PARTIAL REPLACEMENT OF M- SAND BY WASTE FOUNDRY SAND
Praveen kumar P, Dr Kiran kumar B V, Manjunatha S, Kavyashree H L
Department of Civil engineering, Sri Krishnarajendra Silver Jubilee Technological Institute, Bengaluru-01, India
Abstract
The foundry sand is used in metal casting industry, they are repeatedly used till the sand loses their properties and then they are disposed as waste foundry sand. This foundry sand has the properties similar to fine aggregate. In this paper an attempt was made to replace M-Sand with waste foundry sand for M-40grade of concrete with W-C ratio 0.38 and obtained mix ratio is 1:1.87:3.17. The various percentage of waste foundry sand replaced with M-Sand is 0%, 10%, 20%, 30%, 40% and 50%. The Workability of fresh concrete was determined by slump test, vee-bee test and compaction factor test. The strength test was determined for 7th day and 28th day of curing period. Compressive strength test, split tensile strength test and flexural strength test was done on hardened concrete. M-Sand can be successfully replaced by 30% of Waste foundry sand with low cost when compared to conventional concrete.
Keywords
How to cite
Praveen kumar P, Dr Kiran kumar B V, Manjunatha S, Kavyashree H L (2018). LABORATORY STUDY ON M40 GRADE CONCRETE BY PARTIAL REPLACEMENT OF M- SAND BY WASTE FOUNDRY SAND. IJAREST, 5(8), 15-21.
BibTeX
@article{ijarest2018861BB5,
title={{LABORATORY STUDY ON M40 GRADE CONCRETE BY PARTIAL REPLACEMENT OF M- SAND BY WASTE FOUNDRY SAND}},
author={Praveen kumar P and Dr Kiran kumar B V and Manjunatha S and Kavyashree H L},
journal={IJAREST},
volume={5},
number={8},
pages={15-21},
year={2018}
}Published under an open-access licence. See copyright & licensing.