e-ISSN 2393-9877•p-ISSN 2394-2444•Quarterly•Open Access•IF 5.99
Track PaperUpload ReceiptContact
IJAREST logoIJARESTInt. Journal of Advance Research in Engineering, Science & Technology

ADVANCEMENT OF AL-SiC COMPOSITEMATERIAL BY POWDER METALLURGY METHOD AND SYNTHESIZE ON EDM

Dhruv Patel, V.D.Patel, Mihir Patel

Mechanical Engineering, L.D.R.P, India

IJAR-2018-6E6130Vol. 5, Issue 1January 2018Pages 6-9

Abstract

In recent year, aluminum alloy based matrix composites (MMC) are gaining importance in several aerospace and automobile applications. Aluminum has been used matrix material owing of its excellent mechanical properties coupled with good formability. Addition of SiC as reinforcement in aluminum system improves mechanical properties of composites. In the present investigation Al-SiC composite was prepared by powder metallurgy route. Powder metallurgy homogeneously distributes the reinforcement in the matrix with no internal reaction and with less porosity. SiC particles containing different weight fractions (10, 15 and 18 %) and mesh size (320) are used as reinforcement. Though Al-SiC possess superior mechanical properties, the high abrasiveness of the SiC particles obstacle the wide application. Al-SiC composite has the widest application in the aerospace industry due to high hardness and light weight material. After the development of material that specimens were tested the under the micro hardness, density and scanning electron microscopic (SEM).

Keywords

How to cite

APA
Dhruv Patel, V.D.Patel, Mihir Patel (2018). ADVANCEMENT OF AL-SiC COMPOSITEMATERIAL BY POWDER METALLURGY METHOD AND SYNTHESIZE ON EDM. IJAREST, 5(1), 6-9.
BibTeX
@article{ijarest20186E6130,
  title={{ADVANCEMENT OF AL-SiC COMPOSITEMATERIAL BY POWDER METALLURGY METHOD AND SYNTHESIZE ON EDM}},
  author={Dhruv Patel and V.D.Patel and Mihir Patel},
  journal={IJAREST},
  volume={5},
  number={1},
  pages={6-9},
  year={2018}
}

Published under an open-access licence. See copyright & licensing.

✆