e-ISSN 2393-9877•p-ISSN 2394-2444•Quarterly•Open Access•IF 5.99
Track PaperUpload ReceiptContact
IJAREST logoIJARESTInt. Journal of Advance Research in Engineering, Science & Technology

Improvement of Rim Seal Fire Protection System

Shivamkumar Shah, Nitant Patel, Mehul Sorathiya

Mechanical Department, Student of Sigma Institute of Engineering, India

IJAR-2016-9EA979Vol. 3, Issue 4April 2016Pages 442-446

Abstract

Rim seal fires are those that occur in the edge of the rim seal region of the floating roof tank. These are the most common cause of the fire in the floating roof tanks. Ream seal fire is caused by following reasons: 1) Lightning Strikes.2) Sparks produced by static electricity. The automatic rim seal fire detection and extinguishing system immediately detects and suppresses a rim seal fire till such time the foam pourer system is activated. The company is facing the problem in deciding the number of nozzles, distance between the nozzles and finding the orifice diameter of nozzles resulting into uncertainty in discharge time. The number of nozzles is based on the diameter of the tank. The main objective of this project is to identify the problems of the Fire Protection System Used in the Rim Seal and work on diameter of nozzle orifice, deciding the distance between the nozzles and capacity of pressure vessels (Module). The aim of this project is to flood the rim seal area which is of 300mm with AFFF foam so that the fire doesn’t comes in contact with air resulting in extinguishing of fire.

Keywords

How to cite

APA
Shivamkumar Shah, Nitant Patel, Mehul Sorathiya (2016). Improvement of Rim Seal Fire Protection System. IJAREST, 3(4), 442-446.
BibTeX
@article{ijarest20169EA979,
  title={{Improvement of Rim Seal Fire Protection System}},
  author={Shivamkumar Shah and Nitant Patel and Mehul Sorathiya},
  journal={IJAREST},
  volume={3},
  number={4},
  pages={442-446},
  year={2016}
}

Published under an open-access licence. See copyright & licensing.

✆