e-ISSN 2393-9877•p-ISSN 2394-2444•Quarterly•Open Access•IF 5.99
Track PaperUpload ReceiptContact
IJAREST logoIJARESTInt. Journal of Advance Research in Engineering, Science & Technology

PREGUIDED MIG WELDING OF DIFFRENTIAL METAL RING

Kataria Mahendra B, Khunt Hardik A

Assistant Professor, Mechanical Engineering Department, V.V.P Engineering College Rajkot, Gujarat, India, India

IJAR-2016-12DDAEVol. 3, Issue 1January 2016Pages 8-15

Abstract

The motivation behind the idea was the need to decrease spatter and eliminate incomplete fusion defects. The pulsed arc process incorporated the benefits of axial spray transfer — clean, spatter-free welds having excellent fusion with lower heat input. The lower average current provided by GMAW-P allowed for out-of-position welding capability with improved weld quality, when compared with short-circuits transfer. The GMAW process is flexible in its ability to provide sound welds for a very wide base material type and thickness range. Central to the application of GMAW is a basic understanding of the interplay between several essential variables: • The thickness range of the base material to be welded will dictate the electrode diameter, and the useable current range. • The shielding gas selection will influence the selection of the mode of metal transfer, and will have a definite effect on the finished weld profile. Gas Metal Arc Welding (GMAW) process is leading in the development in arc welding process which is higher productivity and good in quality. In this study, the effects of different parameters on welding penetration measurement in mild steel that having the 6mm thickness of base metal by using the robotic gas metal arc welding are investigated. As a result, it obvious that increasing the parameters value of welding current increased the value of depth of penetration. Other than that, arc voltage and welding speed is another factor that influenced the value of depth of penetration.

Keywords

How to cite

APA
Kataria Mahendra B, Khunt Hardik A (2016). PREGUIDED MIG WELDING OF DIFFRENTIAL METAL RING. IJAREST, 3(1), 8-15.
BibTeX
@article{ijarest201612DDAE,
  title={{PREGUIDED MIG WELDING OF DIFFRENTIAL METAL RING}},
  author={Kataria Mahendra B and Khunt Hardik A},
  journal={IJAREST},
  volume={3},
  number={1},
  pages={8-15},
  year={2016}
}

Published under an open-access licence. See copyright & licensing.

✆