e-ISSN 2393-9877•p-ISSN 2394-2444•Quarterly•Open Access•IF 5.99
Track PaperUpload ReceiptContact
IJAREST logoIJARESTInt. Journal of Advance Research in Engineering, Science & Technology

A Review on New Developed Machining Process for Differential Case

Hardik K. Bhatt, Navnit J. Patel, Harsh G. Parmar, Ravindra P. Rathod

PG Student Mechanical Engineering Department, HJD ITER Kera Kachchh, India

IJAR-2015-6BE221Vol. 2, Issue 10October 2015Pages 83-85

Abstract

In this project the machine development process is introduced. In which the milling and turning operation are combined together to form a same differential. As a result of which the production will be increased, reduce loading/unloading time, reduce lead time, increase surface finish and reduce cost per component of differential case. Differential casing is an important component of an automobile. It is first casted with sand casting and then two machining process (i.e.) milling and turning are carried out on it. The main aim of this study is to reduce cost per differential case component by reducing cycle time and improving accuracy in low cost then current machining process. For this combined machining operation a new design of jaws of chuck is designed for the ATM machine with same operational sequence with turning and milling machining operations which results in optimum machining time. Compare the old machining cycle time with the new developed machining cycle time.

Keywords

How to cite

APA
Hardik K. Bhatt, Navnit J. Patel, Harsh G. Parmar, Ravindra P. Rathod (2015). A Review on New Developed Machining Process for Differential Case. IJAREST, 2(10), 83-85.
BibTeX
@article{ijarest20156BE221,
  title={{A Review on New Developed Machining Process for Differential Case}},
  author={Hardik K. Bhatt and Navnit J. Patel and Harsh G. Parmar and Ravindra P. Rathod},
  journal={IJAREST},
  volume={2},
  number={10},
  pages={83-85},
  year={2015}
}

Published under an open-access licence. See copyright & licensing.

✆