e-ISSN 2393-9877•p-ISSN 2394-2444•Quarterly•Open Access•IF 5.99
Track PaperUpload ReceiptContact
IJAREST logoIJARESTInt. Journal of Advance Research in Engineering, Science & Technology

Modeling and Optimization of WEDM Process Parameters on Machining of AISI D2 steel using Response Surface Methodology (RSM)

Sk. Mohammed Khaja, Ratan Kumar, Vikram Singh

CIPET- Hajipur, India

IJAR-2015-4B14FBVol. 2, Issue 8August 2015Pages 49-53

Abstract

The present work demonstrates optimization of Wire Electrical Discharge Machining (WEDM) process parameters of AISI D2 steel with multiple performance characteristics such as Cutting Rate and Gap Current on the Response Surface Methodology (RSM) Method. The process parameters considered in this research work are Pulse On-time, Pulse Off-time and Wire Feed. Taguchi’s L9 Orthogonal Array was used to conduct experiments. Optimal levels of process parameters were identified using Response Surface Methodology and the relatively significant parameters were determined by Analysis of Variance (ANOVA). The variation of output responses with process parameters were mathematically modelled by using non-linear regression analysis method and the models were checked for their adequacy. Result of confirmation experiments shows that the established mathematical models can predict the output responses with reasonable accuracy.

Keywords

How to cite

APA
Sk. Mohammed Khaja, Ratan Kumar, Vikram Singh (2015). Modeling and Optimization of WEDM Process Parameters on Machining of AISI D2 steel using Response Surface Methodology (RSM). IJAREST, 2(8), 49-53.
BibTeX
@article{ijarest20154B14FB,
  title={{Modeling and Optimization of WEDM Process Parameters on Machining of AISI D2 steel using Response Surface Methodology (RSM)}},
  author={Sk. Mohammed Khaja and Ratan Kumar and Vikram Singh},
  journal={IJAREST},
  volume={2},
  number={8},
  pages={49-53},
  year={2015}
}

Published under an open-access licence. See copyright & licensing.

✆