A PARAMETRIC ANALYSIS OF CL50WS STUFF PARTS USING DEFINITE LASER SINTERING OPERATION

Authors

  • Mit K Shah Mechanical Engineering Department, Silver Oak College of Engineering and Technology
  • Ketan Shah Mechanical Engineering Department,Venus International College of Technology
  • Shardul Jani Mechanical Engineering Department, Silver Oak College of Engineering and Technology

Keywords:

Strength; surface roughness; design; selective laser sintering; taguchi approach

Abstract

The main objective of this is paper is to test the mechanical properties like strength and surface roughness of part affected by
changing thickness of layer and orientation of the part material during fabrication by Selective Laser Sintering technique. The
parts will be tested for tensile strength ,first they will be designed and developed and then analyzed using taguchi approach .

Downloads

Published

2015-04-25

How to Cite

Mit K Shah, Ketan Shah, & Shardul Jani. (2015). A PARAMETRIC ANALYSIS OF CL50WS STUFF PARTS USING DEFINITE LASER SINTERING OPERATION. International Journal of Advance Research in Engineering, Science & Technology, 2(4), 185–188. Retrieved from https://ijarest.org/index.php/ijarest/article/view/70

Issue

Vol. 2 No. 4 (2015): Volume: 02, Issue: 04 - April, 2015.

Section

Articles