Experimental Investigate Effects of Cutting tools on Surface Roughness and MRR of EN31 (Alloy Steel) Turning Operation on CNC Machine

Authors

  • Delvadiya Parth P.G student, LDRP-ITRGandhinagar, Gujarat (India)
  • Prof.Ankit Darji Assistant Professor, LDRP-ITRGandhinagar, Gujarat (India)

Keywords:

CNC turning operation, EN-31, Surface roughness, Material removal rate, ANOVA

Abstract

This paper introduces an experimental work of material removal rate and roughness characteristics of surface roughness create
CNC turning on EN-31 composite steel (alloy steel). In this test essential three machining parameters is developed based on
experiment the experiment carries out consider machining parameters cutting speed, feed rate, depth of cut. Three types of cutting
tool turning inserts are use for turning on EN-31 material. Insert material is carbide at relative other coating material it is
physical vapor deposition, chemical vapor deposition. Analysis of experiment adequacy of the models of material removal rate &
surface roughness has been established with the analysis of variance (ANOVA) throw present.

Downloads

Published

2015-04-25

How to Cite

Delvadiya Parth, & Prof.Ankit Darji. (2015). Experimental Investigate Effects of Cutting tools on Surface Roughness and MRR of EN31 (Alloy Steel) Turning Operation on CNC Machine. International Journal of Advance Research in Engineering, Science & Technology, 2(4), 32–37. Retrieved from https://ijarest.org/index.php/ijarest/article/view/38

Issue

Vol. 2 No. 4 (2015): Volume: 02, Issue: 04 - April, 2015.

Section

Articles