DESIGN MODIFICATION AND ANALYSIS OF JCB 3DX EXCAVATOR BRAKING SYSTEM

Authors

  • Vijay C. Makvana P.G. Student - M.E. Machine Design (09) [Gujarat Technological University - GTU] Arham Veerayatan Institute of Engineering, Technology & Research, Mandvi–Kutch, INDIA]
  • Prof. Kapil V. Lakhani Assistant Professor (M.E. - CAD CAM) [Arham Veerayatan Institute of Engineering, Technology & Research, Mandvi–Kutch, INDIA]
  • Prof. Prashant A. Salat Assistant Professor (M.E. –Machine design) [Arham Veerayatan Institute of Engineering, Technology & Research, Mandvi–Kutch, INDIA]

Keywords:

-

Abstract

Brake is a device to stopping and reducing speed of the vehicle. It is vital for the automobile. In JCB
braking system hydraulic brake are used. For the JCB braking system friction plate and counter plate
are vital component. In JCB braking system five friction plates and six counter plates are used for
each side of tyre. For circulation of oil the area of circle of friction plate is small so to increase the
efficiency and effectiveness of the braking system we will increase the area of circle. Then static and
thermal analysis will carried out for the above modification.

Downloads

Published

2016-11-25

How to Cite

Vijay C. Makvana, Prof. Kapil V. Lakhani, & Prof. Prashant A. Salat. (2016). DESIGN MODIFICATION AND ANALYSIS OF JCB 3DX EXCAVATOR BRAKING SYSTEM. International Journal of Advance Research in Engineering, Science & Technology, 3(11), 48–58. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1020

Issue

Vol. 3 No. 11 (2016): Volume: 03, Issue: 11 - November, 2016.

Section

Articles