ELASTO PLASTIC ANALYSIS OF CASTELLATED BEAMS WITH VARIOUS PERFORATION PROFILE USING FEM

Authors

  • Sumit J Goswami PG Student, Department of civil Engineering, Arham Veerayatan Institute of Engineering, Technology & Research, Mandvi-Kutchh
  • Jayant G Kulkarni Department of Civil Engineering, Arham Veerayatan Institute of Engineering, Technology & Research, MandviKutchh

Keywords:

Castellated beam,FEM

Abstract

The review report presents a procedure of make the best opening size ratio for castellated beam, in this
this paper work is done for the finding out the best opening size based on deformation criteria as per the analysis it
is found that consider to deformation criteria regular hexagon opening gives the best results consider to
deformation of the beams, it is also found that if we take 1 (one ) as a ratio of depth and width of opening in
rectangle type opening then it’s also giving good results for deformation criteria for this purpose Ansis software is
used which give the good results for the finite element method.

Downloads

Published

2016-10-25

How to Cite

Sumit J Goswami, & Jayant G Kulkarni. (2016). ELASTO PLASTIC ANALYSIS OF CASTELLATED BEAMS WITH VARIOUS PERFORATION PROFILE USING FEM. International Journal of Advance Research in Engineering, Science & Technology, 3(10), 31–58. Retrieved from https://ijarest.org/index.php/ijarest/article/view/981

Issue

Vol. 3 No. 10 (2016): Volume: 03, Issue: 10 - October, 2016.

Section

Articles