Design and Development of press tool for Hemming process

Authors

  • V.Sunil M.Tech. Student, School of Mechanical Engineering, VIT University, Vellore, Tamil Nadu, India
  • V.Kumarasubramaniam Senior General Manager, Institution Industry Interaction Centre, Chennai, Tamil Nadu, India
  • Dr.E.Rajkumar Associate Professor, School of Mechanical Engineering, VIT University, Vellore, Tamil Nadu, India
  • R.Vicknesh M.Tech. Student, School of Mechanical Engineering, VIT University, Vellore, Tamil Nadu, India
  • M.Ramkumar M.Tech. Student, School of Mechanical Engineering, VIT University, Vellore, Tamil Nadu, India

Keywords:

Mudguard, Press Tool and Die Design, Analysis, Tool Forces

Abstract

The work is about tool design for hemming process for a mudguard. Studied the present process which
is done on a press machine. Tool and die which is used in present press machine are generating some defects
which will affect the aesthetic and productivity of mudguard. Due this defects there will be more rejections. To
eliminate the defects and to increase the productivity, tool, die machine is designed Based on work carried on this
mudguard will increase the productivity and reduce the rejection rate. Press tool and die is designed by using
solidworks software. Numerical simulation software is used for finding forces of press tool required for
deforming the sheet metal edge.

Downloads

Published

2017-03-25

How to Cite

V.Sunil, V.Kumarasubramaniam, Dr.E.Rajkumar, R.Vicknesh, & M.Ramkumar. (2017). Design and Development of press tool for Hemming process. International Journal of Advance Research in Engineering, Science & Technology, 4(3), 175–181. Retrieved from https://ijarest.org/index.php/ijarest/article/view/864

Issue

Vol. 4 No. 3 (2017): Volume: 04, Issue: 03 - March, 2017.

Section

Articles