Wireless Remote for Bridge Crane

Authors

  • Prof. Basavaraj Chougula Dept of E&CE, KLE DR.MSSCET Belgaum
  • Kadappa Dept of E&CE, KLE DR.MSSCET Belgaum
  • Eric Monteiro Dept of E&CE, KLE DR.MSSCET Belgaum
  • Ankita Konge Dept of E&CE, KLE DR.MSSCET Belgaum
  • Anusha Ganapathi Dept of E&CE, KLE DR.MSSCET Belgaum

Keywords:

Microcontroller, RF module, switches, Relays, Motors

Abstract

Human operators are facing many difficulties while driving cranes accurately and safely through wired remotes. It
needs more experience to master. The proposed work utilises the RF module for making a wireless remote, which
could be used to drive an output from distant place. RF module as a name suggests, uses Radio Frequency to send
signals. These signals are transmitted at a particular frequency and baud rate. A receiver can receive these signals
only if it is configured for that frequency.
The input signals, at the transmitter side are taken through 6 switches which are encoded by the 8-bit microcontroller
and are sent by TXD pin. Similarly at the receiving end, the signal is received by RXD pin and decoded to operate
corresponding relay to control direction of rotation of motor.

Downloads

Published

2015-04-25

How to Cite

Prof. Basavaraj Chougula, Kadappa, Eric Monteiro, Ankita Konge, & Anusha Ganapathi. (2015). Wireless Remote for Bridge Crane. International Journal of Advance Research in Engineering, Science & Technology, 2(4), 256–258. Retrieved from https://ijarest.org/index.php/ijarest/article/view/85

Issue

Vol. 2 No. 4 (2015): Volume: 02, Issue: 04 - April, 2015.

Section

Articles