Selection of Contact Button Manufacturing Process for Low Voltage Protection Devices and Validate By EET Test

Authors

  • Atri A. Bhavsar (Electrical Engineering , Birla Vishvakarma Mahavidyalaya/ Gujarat Technological University, India)
  • Dharita K. Patel (Prof. Electrical Engineering Department, Birla Vishvakarma Mahavidyalaya/ Gujarat Technological University, India)

Keywords:

Circuit Breaker, Contact Material, Silver Graphite, Contact Button, Contact Button Erosion.

Abstract

The focus of the studies is on the influence of contact material production parameters, and the
electrical life for breaker interaction of material combinations used for the low voltage protection devices. The
influence of contact button manufacturing process will be scrutinized by practical validation as switching
performance of AgC material with different size and fiber orientation will be compared. The paper represents
guideline for contact button manufacturing process selection for low voltage protection devices as well as which is the
suitable for the low voltage circuit breaker is also described by the EET testing.

Downloads

Published

2017-03-25

How to Cite

Atri A. Bhavsar, & Dharita K. Patel. (2017). Selection of Contact Button Manufacturing Process for Low Voltage Protection Devices and Validate By EET Test. International Journal of Advance Research in Engineering, Science & Technology, 4(3), 30–33. Retrieved from https://ijarest.org/index.php/ijarest/article/view/817

Issue

Vol. 4 No. 3 (2017): Volume: 04, Issue: 03 - March, 2017.

Section

Articles