STRESS CONCENTRATION FACTOR AT THE JUNCTION OF SHELL TO NOZZLE - Review

Authors

  • KAILAS G SAKPAL P.G. STUDENT, MACHINE DESIGN, VEERAYATAN GROUPS OF INSTITUTIONS (FOE & FOM)
  • MR. AMIT ANAKIYA ASST. PROF., MECHANICAL DEPARTMENT, VEERAYATAN GROUPS OF INSTITUTION (FOE & FOM)

Keywords:

pressure vessel, nozzle, stress concentration, stress concentration factor

Abstract

Pressure vessels are used to stored fluid or gases with the required pressure for necessary process. In pressure vessel
nozzle is used to inlet and outlet of fluid; it is the passage of uniformly varying cross-section in which velocity increase. In
pressure, vessel weakened by at the junction of shell to nozzle. The higher stress around the nozzle –shell junction due to
internal pressure, temperature and external load. At junction of shell to nozzle there is higher stress concentrated in that area that
is cause to part fail. Stress concentration is defined as localized stress considerably higher than average due to abrupt change in
geometry .Geometry discontinuity cause stress increase. The effect of stress concentration to determine by dimensionless factor
called stress concentration factor (Kt). The determine of S.F.C is ratio of maximum stress and nominal stress.

Downloads

Published

2015-04-25

How to Cite

KAILAS G SAKPAL, & MR. AMIT ANAKIYA. (2015). STRESS CONCENTRATION FACTOR AT THE JUNCTION OF SHELL TO NOZZLE - Review. International Journal of Advance Research in Engineering, Science & Technology, 2(4), 239–241. Retrieved from https://ijarest.org/index.php/ijarest/article/view/81

Issue

Vol. 2 No. 4 (2015): Volume: 02, Issue: 04 - April, 2015.

Section

Articles