INFLUENCE OF MICRO SILICA AND STEEL SLAG ON PROPERTIES OF HIGH STRENGTH CONCRETE

Authors

  • Pansara Hiren J Research Scholar, Structural engineering department, SVIT-Vasad-388306

Keywords:

High strength concrete(HSC), Micro silica(MS), Steel slag(SS), Replacement, Strength

Abstract

In mix design of HSC many factor should be considering in selection of ingredient the mix design M60 is much
critical than of normal strength concrete due to lower W/c ratio so, use of suitable quantity of plasticizer has been
made here. An attempt has been made by partially replacing cement with micro silica (MS) and Fine aggregate
with steel slag (SS) by incorporative different percentage. Compressive strength, spilt tensile strength, Flexural
strength, and Durability test are investigated. Which conclude compressive, Flexure, tensile have been improved.
Hence, the Viability of using micro silica and steel slag is found in concrete.

Downloads

Published

2016-06-25

How to Cite

Pansara Hiren J. (2016). INFLUENCE OF MICRO SILICA AND STEEL SLAG ON PROPERTIES OF HIGH STRENGTH CONCRETE. International Journal of Advance Research in Engineering, Science & Technology, 3(6), 198–202. Retrieved from https://ijarest.org/index.php/ijarest/article/view/802

Issue

Vol. 3 No. 6 (2016): Volume: 03, Issue: 06 - June, 2016.

Section

Articles