REDUCTION IN LEAD TIME AT TOOL INDUSTRY

Authors

  • Amit Galphade Assistant Professor, Department of Mechanical Engineering, SRICT
  • Chintan Charola Department of Mechanical Engineering, SRICT
  • Parth Gupta Department of Mechanical Engineering, SRICT
  • Vikas Thakur Department of Mechanical Engineering, SRICT

Keywords:

Lead Time, Tool Industry, Productivity, Ideal Time, Manufacturing

Abstract

Productivity is very important aspect of any industry. So when complete product is manufactured it is very
important to have it at appointed time, but sometime it is not possible for an industry to maintain this punctuality so for
that ideal time in the system has to be minimized to get the system working efficiently and to get maximum productivity.
There are enormous numbers of products produced in tool industry but here more focus has been converged to the Taper
Shank tool manufacturing. Bottlenecks in the process of its production is found by using OPC and FPC and by noting and
comparing the practical and theoretically described time consumed in performing activities of the production in order to
achieve the desired goal of the industry that is to maximize the production and minimize the cost hence making product
quality products and cost efficient.

Downloads

Published

2017-02-25

How to Cite

Amit Galphade, Chintan Charola, Parth Gupta, & Vikas Thakur. (2017). REDUCTION IN LEAD TIME AT TOOL INDUSTRY. International Journal of Advance Research in Engineering, Science & Technology, 4(2), 179–183. Retrieved from https://ijarest.org/index.php/ijarest/article/view/794

Issue

Vol. 4 No. 2 (2017): Volume: 04, Issue: 02 - February, 2017.

Section

Articles