Joining of Aluminium 6082-T6 to aluminium 6082- T6 by Friction stir welding

Authors

  • Dhaval chaudhari Assistant professor MED, LIT , sarigam
  • Vyas Dharmin Research scholar MED, LIT, sarigam
  • ,Kevraj Chauhan Research scholar MED, LIT, sarigam
  • Divyaraj Thakor Research scholar MED, LIT, sarigam

Keywords:

Friction stir welding, Aluminium 6082-T6, Hardness, Tensile testing

Abstract

In this research paper, microstructures and mechanical properties of friction stir welded joint of 6082 aluminium
alloy to 6082 aluminium plates in 3 mm thickness with using filler materials. With this aim, welds were produced
using High molybdenum high speed steel, with a cylindrical pin tool having 3 mm and 14 mm diameter of pin and
shoulder respectively. The microstructure and vicker’s microhardeness performed on TMAZ, HAZ and NZ.
Transverse tensile test were performed to evaluate the weakest portion of weld joints.

Downloads

Published

2015-04-25

How to Cite

Dhaval chaudhari, Vyas Dharmin, ,Kevraj Chauhan, & Divyaraj Thakor. (2015). Joining of Aluminium 6082-T6 to aluminium 6082- T6 by Friction stir welding. International Journal of Advance Research in Engineering, Science & Technology, 2(4), 216–217. Retrieved from https://ijarest.org/index.php/ijarest/article/view/76

Issue

Vol. 2 No. 4 (2015): Volume: 02, Issue: 04 - April, 2015.

Section

Articles