Load frequency control of three area power system using PID tuning by Ziegler Nichols(Z-N) method

Authors

  • Vasava Kiranbhai Rupsingbhai M.E.Power System Student, Parul Institute of Technology,Vadodara,India

Keywords:

LFC(load frequency control),PID controllers,Z-N tuning,Power system

Abstract

In this paper,a brief study of the different control strategies used) for tuning of PID controller.The
conventional PID is replaced by(1) Z-N tuning PID controller and (2)Fuzzy logic controller(FLC) Load frequency
control is generally used to maintain the balance between generation side and load side.This type of control is used for
each area by means of speed control.The main objective of load frequency control(LFC) is to decreasing steady state and
transient error to “0”.This paper describes LFC with time delays using simulation results in Matlab/simulink
environment.

Downloads

Published

2016-05-25

How to Cite

Vasava Kiranbhai Rupsingbhai. (2016). Load frequency control of three area power system using PID tuning by Ziegler Nichols(Z-N) method. International Journal of Advance Research in Engineering, Science & Technology, 3(5), 508–811. Retrieved from https://ijarest.org/index.php/ijarest/article/view/663

Issue

Vol. 3 No. 5 (2016): Volume: 03, Issue: 05 - May, 2016.

Section

Articles