Load following mode Control of Solar PhotoVoltaics Generation for providing Ancillary service of reactive power in distribution system

Authors

  • Bhargav Balbhadra Electrical Department, Parul institute of Technology
  • Ajit Rathod Electrical Department, Parul institute of Technology

Keywords:

Solar PV; Active-Reactive power control; Grid-integration; Ancillary service; Load following mode control; Distributed generation

Abstract

In this paper, control of active as well as reactive power of solar PV generation with load following is
discussed. Here a method to model solar PV and grid-connected inverter for the same is discussed. Controlling of active
power in load following mode is possible only when there is enough generation is available during daytime, while
controlling of reactive power can be achieved at day and night time also. This paper explores capability of static
converters to supply both active and reactive power as per the demands. All the simulations are done in MATLAB,
Simpowersystems.

Downloads

Published

2016-05-25

How to Cite

Bhargav Balbhadra, & Ajit Rathod. (2016). Load following mode Control of Solar PhotoVoltaics Generation for providing Ancillary service of reactive power in distribution system. International Journal of Advance Research in Engineering, Science & Technology, 3(5), 250–258. Retrieved from https://ijarest.org/index.php/ijarest/article/view/629

Issue

Vol. 3 No. 5 (2016): Volume: 03, Issue: 05 - May, 2016.

Section

Articles