Design tables for isolated foundation for microwave tower of various heights and SBC.

Authors

  • Patel Saurav P.G Student, Department of Civil Engineering, Arham Veerayatan Institute Of Engineering, Technology & Research Mandvi-kutchh
  • Asst. Prof. Ramjiani Riteshkumar Department of Civil Engineering, Arham Veerayatan Institute Of Engineering, Technology & Research Mandvi-kutchh

Keywords:

Microwave Tower Foundation, different SBC, Various Height

Abstract

The paper presents the study of tower foundations of reinforced concrete of different height with different
SBC designed for wind forces in the zone V of Indian subcontinent with varying SBC 100KN/m2, 200KN/m2,
225KN/m2. 250 kN/m2
, 300 kN/m2
, 325 kN/m2
, 350 kN/m2
, 375 kN/m2
, 400 kN/m2
.The foundation types considered
are; isolated footings under different allowable bearing pressure Values of the different type of soils. The study
provides the requirement of structural quantities of the tower foundations in different SBC. The result of the study is
useful for the design professionals and cost during design development and budget planning. The study also
highlights the achievable low-cost in foundation costs through proper calculation of allowable bearing pressure of
soils through adequate geotechnical investigations of the tower sites

Downloads

Published

2016-05-25

How to Cite

Patel Saurav, & Asst. Prof. Ramjiani Riteshkumar. (2016). Design tables for isolated foundation for microwave tower of various heights and SBC. International Journal of Advance Research in Engineering, Science & Technology, 3(5), 231–237. Retrieved from https://ijarest.org/index.php/ijarest/article/view/627

Issue

Vol. 3 No. 5 (2016): Volume: 03, Issue: 05 - May, 2016.

Section

Articles