EXPERIMENTAL INVESTIGATION OF PROCESS PARAMETERS OF FIBRE LASER ON CUTTING QUALITY OF STAINLESS STEEL 304- A REVIEW

Authors

  • Yamesh Patel Student, M.E. Department of Production Engineering, S.N.P.I.T. & R.C., Bardoli, Gujarat, India
  • Arif Varsi Asst. Prof., Department of Production Engineering, S.N.P.I.T. & R.C., Bardoli, Gujarat, India
  • Shalin Marathe Asst. Prof., Department of Production Engineering, S.N.P.I.T. & R.C., Bardoli, Gujarat, India

Keywords:

-

Abstract

Fibre laser is a newer technology in laser cutting. Also, available at different power levels and very narrow spot
size. Stainless Steel is widely used in industries throughout the world. It requires higher power due to the
hardness and reflectivity. Therefore fibre laser are used for cutting Stainless Steel(SS-304). The aim of this work
is to study the influence of process parameters namely: laser power, cutting speed, assist gas pressure on cutting
quality like kerf width using AUTOCAD and surface roughness using profile meter SJ-201 (MITUTOYO).
Design of Experiment (DOE) like FULL FACTORIAL method will be used to find the number of experiment
runs to perform on the fibre laser machines. A regression analysis will be used to find the relation between
process parameters and response. Also the interaction between process parameters and its effect on response
will be done by ANOVA analysis.

Downloads

Published

2016-04-25

How to Cite

Yamesh Patel, Arif Varsi, & Shalin Marathe. (2016). EXPERIMENTAL INVESTIGATION OF PROCESS PARAMETERS OF FIBRE LASER ON CUTTING QUALITY OF STAINLESS STEEL 304- A REVIEW. International Journal of Advance Research in Engineering, Science & Technology, 3(4), 550–555. Retrieved from https://ijarest.org/index.php/ijarest/article/view/591

Issue

Vol. 3 No. 4 (2016): Volume: 03, Issue: 04 - April, 2016.

Section

Articles