A Review on Reducing Cross contamination on M.S. and S.S

Abstract

Cross Contamination Defect is Occurred in Generally Metal Joining Process. In this Process Cross
Contamination is Occred in Joining of Mild Steel and Stainless Steel. This Defect is occurred by Mixing of mild steel
and stainless steel by arc welding process.Stainless steel is used to made of Pressure vessels,but stainless steel is high
cost material,so for reducing of cost by metal joining process of ms and ss is necessary. The joining of the materials by
welding provides a permanent joint of the components. The objective of this research is used to determine the
influence of various welding parameters on the weld bead of AISI 316 welded joint. Stainless steel is a candidate
material for the structural material in fusion reactors. Rewelding of irradiated materials will have a large impact on
the design and the maintenance of in-vessel components. The rewelding of unitradiated and/or irradiated stainless
steel was performed by the tungsten inert gas (TIG) welding method and the weldments of unit-radiated and/or
irradiated SS316 were characterized by tensile testing. An attempt is made in the present study to obtain the
relationships among process parameters and physical dimensions of AA6063 aluminium alloy coating on IS2062 mild
steel obtained through friction surfacing and their impact on strength and ductility of the coating. Factorial
experimental design technique was used to investigate and select the parameter combination to achieve a coating with
adequate strength and ductility. Spindle speed, axial force and table traverse speed were observed to be the most
significant factors on physical dimensions.