DESIGN OF BOOST CONVERTER FOR ELECTRIC VEHICLE APPLICATIONS USING PI & FUZZY LOGIC CONTROLLER

Authors

  • Bhaumik D Patel Electrical Engineering Ahmedabad Institute of Technology, Ahmedabad, Gujarat, India
  • Jignesh Patel Prof. Electrical Engineering Department, Ahmedabad Institute of Technology
  • Chirag Patel Prof. Electrical Engineering Department, Ahmedabad Institute of Technology
  • Divya Makwana Prof. Electrical Engineering Department, L D College of Engineering

Keywords:

-

Abstract

In recent years the availability of petroleum resources has decreased, which has paved the way for
Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs). In order to achieve a better drive range and
improved performance of the motor, control techniques are necessary for the DC to DC power converters
which are used in these vehicles. Designing of linear controllers for these converters like Proportional Integral
(PI) non-linear controllers like Fuzzy Logic Controller that gives constant output which improves the
performance of Drive. The above concept is tested for DC to DC boost converters in simulation in this paper.

Downloads

Published

2016-04-25

How to Cite

Bhaumik D Patel, Jignesh Patel, Chirag Patel, & Divya Makwana. (2016). DESIGN OF BOOST CONVERTER FOR ELECTRIC VEHICLE APPLICATIONS USING PI & FUZZY LOGIC CONTROLLER. International Journal of Advance Research in Engineering, Science & Technology, 3(4), 542–546. Retrieved from https://ijarest.org/index.php/ijarest/article/view/589

Issue

Vol. 3 No. 4 (2016): Volume: 03, Issue: 04 - April, 2016.

Section

Articles