PLACEMENT OF DISTRIBUTION GENERATOR IN DISTRIBUTION SYSTEM FOR DIFFERENT LOADING CONDITION

Authors

  • Khushbu A. Patel Electrical Engineering, AI T
  • Urvish Mewada Electrical Engineering, AI T
  • Yamin Bhati Electrical Engineering, AI T
  • Harshal B. Patel BioMedical Engineering, Government Polytechnic, Gandhinagar

Keywords:

Distribution generator; IEEE 14 bus radial system; optimal location; optimal size; different loads of system; loss sensitivity factor method; improved analytical method

Abstract

Nowadays as use of DG is increasing significantly in power distribution industries but the proper placement
of DG is necessary to reduce system losses. Here IEEE 14 bus radial distribution system is used to calculate losses
after DG placement. DG placement is considered here for different loading of system like peak load, 75% and 50%
loading conditions. IA method and LSF methods are used to find optimal location and size of DG at different loads
and are compared.

Downloads

Published

2016-04-25

How to Cite

Khushbu A. Patel, Urvish Mewada, Yamin Bhati, & Harshal B. Patel. (2016). PLACEMENT OF DISTRIBUTION GENERATOR IN DISTRIBUTION SYSTEM FOR DIFFERENT LOADING CONDITION. International Journal of Advance Research in Engineering, Science & Technology, 3(4), 374–381. Retrieved from https://ijarest.org/index.php/ijarest/article/view/559

Issue

Vol. 3 No. 4 (2016): Volume: 03, Issue: 04 - April, 2016.

Section

Articles