Empirical modeling of cylindricity in turning operation of 20MNCR5 using response surface method

Authors

  • Hiren Pal (Asst Prof) Production Department, Birla Vishvakarma Mahavidyalaya V.V.Nagar
  • B.S.Patel (Asso Prof) Mechanical Department, Birla Vishvakarma Mahavidyalaya V.V.Nagar
  • Jayesh Koisha (Asst Prof) Mechanical Department, Birla Vishvakarma Mahavidyalaya V.V.Nagar

Keywords:

20MNCR5; machining parameters; turning, empirical model; response surface method; Design Expert8

Abstract

20MNCR5 is widely used material in gear manufacturing industries. Turning is the major metal removal process in gear
manufacturing. Quality of turned surface is specified by many characteristics. One of them is cylindricity. Lower the value of
cylindricity, higher will be the quality. The empirical model for the cylindricity is prepared in this study. Here response surface
method is employed to prepare empirical model. The machining parameters are spindle speed, feed rate, depth of cut. The
empirical model will help to find out the value of the quality i.e. cylindricity at different machining parameters.

Downloads

Published

2015-11-25

How to Cite

Hiren Pal (Asst Prof), B.S.Patel (Asso Prof), & Jayesh Koisha (Asst Prof). (2015). Empirical modeling of cylindricity in turning operation of 20MNCR5 using response surface method. International Journal of Advance Research in Engineering, Science & Technology, 2(11), 35–38. Retrieved from https://ijarest.org/index.php/ijarest/article/view/336

Issue

Vol. 2 No. 11 (2015): Volume: 02, Issue: 11 - November, 2015.

Section

Articles