Final Working of Rolling Pipe Bending Machine

Authors

  • Dhaval T, Suthar Mechanical, Bhagwan Mahavir College of Engineering and Technology, Surat
  • Kiran R. Malvi Mechanical, BhagwanMahavir College of Engineering and Technology, Surat
  • Deneesh K. Patel Mechanical, BhagwanMahavir College of Engineering and Technology, Surat

Keywords:

Pulley, motor, gears, sprocket, big screw, shaft, C-panel

Abstract

This research presents a new mobile bending machine and its practical applications. The proposed machine uses a new method.
When pipes are fed between the pulleys they are bent by shifting the relative position. The bending angle is controlled by the
length of the fed pipe. This forming process has a big advantage. A change of the expected bending shape will need no change in
the tooling system.

Downloads

Published

2015-04-25

How to Cite

Dhaval T, Suthar, Kiran R. Malvi, & Deneesh K. Patel. (2015). Final Working of Rolling Pipe Bending Machine. International Journal of Advance Research in Engineering, Science & Technology, 2(4), 1–3. Retrieved from https://ijarest.org/index.php/ijarest/article/view/29

Issue

Vol. 2 No. 4 (2015): Volume: 02, Issue: 04 - April, 2015.

Section

Articles