Design and Manufacturing of Fixturefor Compressor Die Cast Body

Authors

  • Denish R. Vaghani Mechanical, Tapi Diploma Engineering College
  • Jayesh V. Savaj Mechanical, Tapi Diploma Engineering College
  • Vishal J. Rana Mechanical, Tapi Diploma Engineering College
  • Shubham A. Vaghani Mechanical, Tapi Diploma Engineering College
  • Krunal R. Virani Mechanical, Tapi Diploma Engineering College

Keywords:

Fixture; Design; Compressor; Body; Vertical; Machining; Center; Pro-E, Prototype

Abstract

During the Shodhyatra, we were gone to industries, where industry will planto start the machining on die
cast compressor body on VMC machine butindustry has no fixture for this job. So, we are decided to make the fixture
for compressor die cast body. Industry providesan un-machined componentto us. First of all, we have made 2D and 3D
drawing with its dimensions in Pro-E software. The fixture design is based on the operation to be performed on the
component. The number of operations performed on component is drilling, inside machining and cutting. Then after
we were design the two fixtures for two positions in Pro-E software according to 3-2-1 principle and also make
prototype for same.The details of the fixture such as its components, design considerations, procedure to fix a job and
bill of materials have been specified.

Downloads

Published

2020-03-25

How to Cite

Denish R. Vaghani, Jayesh V. Savaj, Vishal J. Rana, Shubham A. Vaghani, & Krunal R. Virani. (2020). Design and Manufacturing of Fixturefor Compressor Die Cast Body. International Journal of Advance Research in Engineering, Science & Technology, 7(3), 9–15. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1977

Issue

Vol. 7 No. 3 (2020): Volume: 07, Issue: 03 - March, 2020.

Section

Articles