ANALYSIS OF GAS IN AIR IN A VEHICLE CABIN BASED ON IOT

Authors

  • Mr.D.Sunderasekaran Adjunct Professor, Dept of Electronics and Communication Engineering, Velammal Institute of Technology
  • M.Janani UG Student, Dept of Electronics and Communication Engineering, Velammal Institute of Technology
  • S.Lakshmi Preethi UG Student, Dept of Electronics and Communication Engineering, Velammal Institute of Technology
  • B.Sneha UG Student, Dept of Electronics and Communication Engineering, Velammal Institute of Technology

Keywords:

Internet of things (IoT), Gas sensor, NodeMcu, CD loader, Relay

Abstract

Motor vehicles are the basic source of transportation where vehicles with A/C play a
major part. This paper designs an embedded system for a vehicle cabin, which senses the gases like
carbon-monoxide if the level goes above the normal value and oxygen level if it goes below the normal
value and displays each and every second. If the level of the CO increases than the normal level or the
level of the oxygen decreases than the normal level then ventilation is provided immediately by window
sliding. A warning message is sent to the authorized user via IoT Module. The advantage of this device
is for proper detection and faster response time which leads to faster solving of the situation, compared
to manual method.

Downloads

Published

2019-03-25

How to Cite

Mr.D.Sunderasekaran, M.Janani, S.Lakshmi Preethi, & B.Sneha. (2019). ANALYSIS OF GAS IN AIR IN A VEHICLE CABIN BASED ON IOT. International Journal of Advance Research in Engineering, Science & Technology, 6(3), 1–5. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1895

Issue

Vol. 6 No. 3 (2019): Volume: 06, Issue: 03 - March, 2019.

Section

Articles