Design Analysis of Mounting Bracket of Compressor in Automobile Air Conditioning System

Authors

  • Mr. Nitin B. Sall Mechanical Engineering, J.T. Mahajan College of Engineering, Faizpur
  • Prof. Tushar Devidas Garse Mechanical Engineering, J.T. Mahajan College of Engineering, Faizpur

Keywords:

compressor mounting bracket; dynamic analysis; natural frequency; mode shapes; FFT analyser; ANSYS

Abstract

With the automotive air-conditioning industry aiming at higher levels of quality, cost effectiveness and a short time to
market, the need for simulation is at an all-time high. In the present work, the use of dynamics analysis technique is proposed in
the simulation of the automobile compressor mounting bracket for the vibration loads. The mounting bracket has been analysed
using the standard testing conditions. The results revealed that compressor mounting bracket may fail due to resonance in dynamic
analysis, but in the static analysis, resonance cannot be predicted under the same magnitude of load. Therefore, dynamic analysis
gives a realistic method for its design validation. With the use of the methodology, a new compressor mounting bracket is analysed
and optimized. The design analysis would be carried out by using FFT Analyser and Finite Element Analysis software like ANSYS.

Downloads

Published

2018-07-25

How to Cite

Mr. Nitin B. Sall, & Prof. Tushar Devidas Garse. (2018). Design Analysis of Mounting Bracket of Compressor in Automobile Air Conditioning System. International Journal of Advance Research in Engineering, Science & Technology, 5(7), 67–71. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1846

Issue

Vol. 5 No. 7 (2018): Volume: 05, Issue: 07 - July, 2018.

Section

Articles