Auto Farm Monitoring System by Using IOT

Authors

  • Richa Dhoke Computer Science and Engineering, Prof. Ram Meghe Institute of Technology and Research, Badnera
  • Rakhi Bramhane Computer Science and Engineering, Prof. Ram Meghe Institute of Technology and Research, Badnera
  • Pooja Ramteke Computer Science and Engineering, Prof. Ram Meghe Institute of Technology and Research, Badnera
  • Suraj Chate Computer Science and Engineering, Prof. Ram Meghe Institute of Technology and Research, Badnera
  • Prof. Sangram Dandge Computer Science and Engineering, Prof. Ram Meghe Institute of Technology and Research, Badnera

Keywords:

IOT, wifi, raspberry pi, sensors

Abstract

Agriculture is the basic occupation in our country. But now due to migration of people from rural to
urban and do to the lack of knowledge regarding technology there is hindrance in farming. So to overcome this
problem we go for auto farm monitoring system by using IOT. Technological importance has been a great support for
making decisions in farming. The development of agriculture has been on under development for the past few years
due to lack of Agriculture knowledge, environmental changes and technological knowledge. Here, the main focus is
on the improvement of rural and agricultural development through advanced information and communication
processes. This project includes various features like humidity & temperature sensing and proper irrigation. It makes
use of modem for internet. Various sensor nodes are deployed at different locations in the farm for noting the
temperature and humidity. These parameters are controlled through any remote device like android application and
the operations are performed by interfacing sensors, Wi-Fi, camera with raspberry pi board. This concept is created as
a product and given to the farmer for their welfare.

Published

2018-04-25

How to Cite

Richa Dhoke, Rakhi Bramhane, Pooja Ramteke, Suraj Chate, & Prof. Sangram Dandge. (2018). Auto Farm Monitoring System by Using IOT. International Journal of Advance Research in Engineering, Science & Technology, 5(4), 148–151. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1439