ARDUINO BASED HEALTH MONITORING SYSTEM

Authors

  • Varun Solanki Department of Electronics and Telecommunication Engineering, Theem College Of Engineering,Boisar,Maharashtra,India
  • Khalil Shaikh -
  • Shahnawaj Ali -
  • Halim Shah -
  • Assistant Prof.Syed Amjed Ali -

Keywords:

component: Arduino uno , Zigbee , senors: Pulse rate sensor , ECG sensor , Temperature sensor

Abstract

This project is about wireless biomedical parameters monitoring system based on different biomedical
sensors and microcontroller unit Arduino UNO with Zigbee. The system can be used to measure physiological
parameters, such as Pulse rate, ECG monitoring, Temperature of a human subject. Using several sensors to measure
different vital signs, the person is wirelessly monitored within his own home. There are number of techniques available
for the ICU patient’s health monitoring system with wired communication technology. In the novel system the patient
health is continuously monitored using wireless sensor networks and the acquired data is transmitted to a
microcontroller unit Arduino UNO and then to Zigbee. At the receiver side the data is collected with Zigbee and Arduino
and displayed on relevant displays.

Downloads

Published

2018-03-25

How to Cite

Varun Solanki, Khalil Shaikh, Shahnawaj Ali, Halim Shah, & Assistant Prof.Syed Amjed Ali. (2018). ARDUINO BASED HEALTH MONITORING SYSTEM. International Journal of Advance Research in Engineering, Science & Technology, 5(3), 821–826. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1354

Issue

Vol. 5 No. 3 (2018): Volume: 05, Issue: 03 - March, 2018.

Section

Articles