ANALYSIS OF SEPIC CONVERTER USING PID AND FUZZY LOGIC CONTROLLER

Authors

  • Swetha V BE-IV year (Electrical and Electronics Engineering), student Dr.Mahalingam College of Engineering and Technology, pollachi-642 003
  • Gunasekar C BE-IV year (Electrical and Electronics Engineering), student Dr.Mahalingam College of Engineering and Technology, pollachi-642 003
  • Boopal R BE-IV year (Electrical and Electronics Engineering), student Dr.Mahalingam College of Engineering and Technology, pollachi-642 003
  • Helen Catherine R.L AsstProfessor, Department of Electrical and Electronics Engineering Dr.Mahalingam College of Engineering and Technology, pollachi-642 003

Keywords:

-

Abstract

This paper explains about the performance of single-ended primary-inductor (SEPIC)
converter using PID and FLC(Fuzzy Logic Controller).SEPIC converter consists of power
semiconductor devices which are operate as an electronic switches. Operation of SEPIC
converter produces harmonics due to the presence of semiconductor device in it. This can be
reduced by controlling the converter using PID and FLC.The development of FLC is to generate
the control for pulse of required duty cycle to the MOSFET to maintain constant output voltage.
The converter is controlled by both PID and Fuzzy Logic Controller. In this paper the
performance analysis of both the controller has been done by using the Matlab simulink.By
comparing both the results the hardware is implemented for the stable and fast response.

Downloads

Published

2018-03-25

How to Cite

Swetha V, Gunasekar C, Boopal R, & Helen Catherine R.L. (2018). ANALYSIS OF SEPIC CONVERTER USING PID AND FUZZY LOGIC CONTROLLER. International Journal of Advance Research in Engineering, Science & Technology, 5(3), 623–633. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1302

Issue

Vol. 5 No. 3 (2018): Volume: 05, Issue: 03 - March, 2018.

Section

Articles