Planning & Design Of New By-pass Road Connecting Popatpura To Vavadi, Ghodhara, Gujarat By Using Autodesk CIVIL 3D Software

Authors

  • Digmita Patel ME student, Transportation Engineering Student , HGCE, Vahelal, Gujarat
  • Pankaj Goyal Director, Infinite Civil Solutions Private Limited, Ahmedabad
  • Shrinath Karli Assistant Professor, Civil Engineering Department, HGCE, Vahelal, Gujarat

Keywords:

Geometric Design, Autodesk Civil 3D, Horizontal Alignment, Vertical Alignment.

Abstract

The development of effective road transport system is primary need of any developing country. Also
provision of new road network is essential for developing countries to carry out its transportation functions smoothly as
with increasing traffic volume urban and non-urban roads reach to their saturation level with passage of time. So for this
job the best available Highway Geometric Design Software must be used for designing of road. Keeping this in view we
have used Autodesk Civil 3D Software for the geometric design of the proposed bypass road of Godhara, Gujarat to
provide its geometric design. The Software uses 3D design to give the values of different components of geometric
design such as Horizontal and Vertical Alignment, Super elevation, etc

Downloads

Published

2017-04-25

How to Cite

Digmita Patel, Pankaj Goyal, & Shrinath Karli. (2017). Planning & Design Of New By-pass Road Connecting Popatpura To Vavadi, Ghodhara, Gujarat By Using Autodesk CIVIL 3D Software. International Journal of Advance Research in Engineering, Science & Technology, 4(4), 537–542. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1263

Issue

Vol. 4 No. 4 (2017): Volume: 04, Issue: 04 - April, 2017.

Section

Articles