Ultracapacitor selection and design for the Regenerative Breaking

Authors

  • Mehulkumar D. Bhanderi PG student, Electrical Engineering, LDCE, Ahmedabad
  • Jiten K. Chavda Assistant Professor, Electrical Engineering, LDCE, Ahmedabad

Keywords:

Regenerative Energy, Ultracapacitor, Ultracapacitor losses, Ultracapacitor losses.

Abstract

Due to the several advantages of the electrochemical double layer capacitor (EDLC) also called the
ultracapacitor over the Electrochemical Batteries it is intensively used in the Regenerative Energy Recovery system in
the modern controlled electrical drives. Where ultracapacitor can fully charge and discharge in few number no of
seconds also it can be served as a short-term UPS during the power interruption condition. In this paper complete
selection and design guideline for the selection of the ultracapacitor module. Selection of the mail parameters such as
capacitance, voltage rating, and efficiency, number of series or parallel connected cells, conversion losses are
discussed. At the end of the paper the design example of the practical drive is presented

Downloads

Published

2017-04-25

How to Cite

Mehulkumar D. Bhanderi, & Jiten K. Chavda. (2017). Ultracapacitor selection and design for the Regenerative Breaking. International Journal of Advance Research in Engineering, Science & Technology, 4(4), 517–523. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1260

Issue

Vol. 4 No. 4 (2017): Volume: 04, Issue: 04 - April, 2017.

Section

Articles