Hydraulic Scissors lift design, manufacturing & analysis

Authors

  • Varun jaiswal Department of Mechanical Engineering (CAD/CAM) , MALWA INSTITUT OF TECHNOLOGY , INDORE (MADHYA PRADESH ) – 452001
  • Mr. Dilip Gehlot Department of Mechanical Engineering (CAD/CAM) , MALWA INSTITUT OF TECHNOLOGY , INDORE (MADHYA PRADESH ) – 452001
  • Mr. Vikas Sharma Department of Mechanical Engineering (CAD/CAM) , MALWA INSTITUT OF TECHNOLOGY , INDORE (MADHYA PRADESH ) – 452001

Keywords:

Hydraulic scissor lift , hand pump , vonmisses stresses , ansys

Abstract

The following paper describes the design as well as analysis of a hydraulic scissor lift. The design value
the conventional method of using rope, ladder, scaffold etc. conventionally a scissor lift or jack is used for lifting a
vehicle to change a tier, to gain access to go the underside of the vehicle , to lift the body and many application the
lift can be used for various purpose like maintenance and material handling operations. It also have a different
types the design describe the lift can be operated by mechanical means by using pantograph so the cost of the lift
will reduce. In this project a mobile scissor lift has been design that will be powered by hydraulic hand pump
without consuming electric power. We decided to use the hydraulic hand pump and cylinder. These designs make the
lift more compact and must suitable for medium scale work. Finally the analysis of scissor lift was done in ansys
and all responsible parameter were analyzed.

Downloads

Published

2016-03-25

How to Cite

Varun jaiswal, Mr. Dilip Gehlot, & Mr. Vikas Sharma. (2016). Hydraulic Scissors lift design, manufacturing & analysis. International Journal of Advance Research in Engineering, Science & Technology, 5(3), 163–172. Retrieved from https://ijarest.org/index.php/ijarest/article/view/1188

Issue

Vol. 5 No. 3 (2018): Volume: 05, Issue: 03 - March, 2018.

Section

Articles