Finite Element Analysis of 2D Object

Authors

  • Maulik C. Vadnere Bhagvan Mahavir College of Engineering and Technology, Surat
  • Assistant Professor Mehta Gauravkumar Bharatbhai Bhagvan Mahavir College of Engineering and Technology, Surat

Keywords:

FE analysis, Ansys, Numerical model, triangular elements, quadrilateral elements, meshing

Abstract

Finite Element Analysis of 2D objects (plate with a centrally located hole) using Ansys software with elements, meshing & boundary
conditions. This shall be achieved by considering the plate with a centrally located hole with uniform applied stress along its two
edges. Then the result is analysed in terms of the stress produced in the vicinity of the hole using different meshing elements in Ansys.
The plate is modelled & analysed 1/4th of the plate instead of the whole as the plate is symmetric about horizontal & vertical axis in
both geometry & loading.

Downloads

Published

2015-05-25

How to Cite

Maulik C. Vadnere, & Assistant Professor Mehta Gauravkumar Bharatbhai. (2015). Finite Element Analysis of 2D Object. International Journal of Advance Research in Engineering, Science & Technology, 2(5), 48–50. Retrieved from https://ijarest.org/index.php/ijarest/article/view/112

Issue

Vol. 2 No. 5 (2015): Volume: 02, Issue: 05 - May, 2015.

Section

Articles