REDUCTION OF DEFECTS IN HOT ROLLING PROCESS USING SIX SIGMA

Authors

  • Grusha Kalyan Production Engineering Department, Government Engineering College-Bhavnagar
  • Priyanka Sharma Production Engineering Department, Government Engineering College-Bhavnagar

Keywords:

Hot rolling process, Six Sigma, defects, DMAIC problem solving methodology

Abstract

The above titled project was carried out at a company where various products were made using forming process. During project
it was found that defects were occurring in hot rolling process which was in satisfactory from quality point of view. For sorting
this problem Six Sigma was used. The DMAIC methodology was carried out during this project, as a result of which number of
defects was considerably reduced.

Downloads

Published

2015-05-25

How to Cite

Grusha Kalyan, & Priyanka Sharma. (2015). REDUCTION OF DEFECTS IN HOT ROLLING PROCESS USING SIX SIGMA. International Journal of Advance Research in Engineering, Science & Technology, 2(5), 44–47. Retrieved from https://ijarest.org/index.php/ijarest/article/view/111

Issue

Vol. 2 No. 5 (2015): Volume: 02, Issue: 05 - May, 2015.

Section

Articles